DC Currently has the following items for sale:
Sale valid 8/30/2010 thru 9/10/2010

(last updated 9/1/2009)

 

 

 

DC Prop Builders Handbook (Volume 1)

The DC Prop Builders Handbook is 135 pages of highly detailed prop building instructions, including tons of pictures and diagrams to aid you in the construction of 22 of our prop designs. The designs included in this book are: The Skeletal Organist, Pipe Organ, Stump Jumper, Rocking Chair, two Coffins, Ghost Heads, Pneumatic lifter, Pneumatic Extender, and many more. The book also has a section on basic pneumatics to guide you on your way to create your own (pneumatically driven) Devious Concoctions.

Price $40.00 Sale Price $35.00


DC Prop Builders Handbook
(Volume 2)

The Second DC Prop Builders Handbook is the newest addition to the DC Prop Builders Handbook series featuring 137 pages of extremely descriptive instructions to create yet another 10 of our unique designs. These designs include the following: Heavy Duty Lifter, Pneumatic Extender (scissor lift/extender), Drop Panels, Un-Dead Coffin (and erector mechanism), Thrashing Corpse, Thrashing Doors, The Mourner, Lightning Window, Air Cannons, & Pneumatic Web Shooter.

The second edition was been in the makings for almost two years, so no expense has been spared in detailing every step, as well as the addition of a multitude of diagrams for every drilling pattern and questionable construction step. The second book also has far more pictures added (average of 2 per page) with much higher resolution prints. So the building process should be easy to follow even though the props are slightly more difficult.

The book also has an in depth introduction to computer control and pneumatics, so not only will you have the instructions to build the prop, but the knowledge of it's internal workings and a means of control.

Price $40.00 Sale Price $35.00


DC Prop Book Bundle


Get Both DC Prop Book volumes 1 & 2 at an additional savings.

Price $75.00 Sale Price $68.00

Canada Residents Please use "buy now" below:


DC Prop Book & DVD Bundle


Get Both DC Prop Books (1 & 2) and the 2007/2008 DVD at an additional savings.

Price $85.00 Sale Price $76.00

Canada Residents Please use "buy now" below:


DC 2008/2007 Haunt Video (DVD)


The 2008 video features 38 minutes of all of our newest concoctions, with additional control system and daylight/behind the scenes footage.

The 2007 video features 28 minutes of footage from the Award Winning 2007 DC Cemetery.

All videos are professionally edited and include haunt footage, haunt footage with actual audio and behind the scenes shots of the cemetery and individual props. The video is composed on one high quality DVD, and are great for a mid year halloween fix.

Price $18.00 Sale Price $8.00


DC 2005/2006 Haunt Video with bonus footage

The 2005/2006 video compellation features 90 minutes of all of our newest concoctions in the 2006 and 2005 seasons as well as a bunch of behind the scenes footage and news coverage.

The video is professionally edited and includes haunt footage, haunt footage with actual audio and behind the scenes shots of the cemetery and individual props. The video is composed on one high quality DVD, and are great for a mid year halloween fix.

Price $12.00 Sale Price $7.00



DC Medium Lifter

(for standard props)

The DC Medium Lifter is the same mechanism as our heavy lifter, but engineered to animate lighter props (up to 30-40 lbs safely) from a starting point of 12" up to 34" (22" of travel).

This lifter is designed as an "all around" lifter for haunt use, and can be used in a wide range of applications.

The lifter lifts up, and comes forward toward the viewer, so this is a perfect armature for use behind a bush, tombstone, or other faced item.

Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings) Kit includes everything needed to operate and control and ships ready to run* out of the box.

Welded mounting brackets included

Size 28" x 18" x 10"
Price $380.00 Sale Price $345.00



DC Light Lifter

(for lightweight props)

The The DC Light Lifter was designed to animate simple props such as foam heads with masks, or upper body props that do not require alot of lifting force. The light lifter is engineered to operate a 20" travel from a starting point of 10" up to 30" (lifter platform height).

The light lifter is smaller and a much simpler design then the other lifters which makes it a great introductory armature for first time users that have wanted to get into haunting with air, but did not require large heavy duty mechanisms. Its simplistic design allows a lower price, while still achieving the strength, durability, and ease of use as the entire DC line of armatures.

Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings) Kit includes everything needed to operate and control and ships ready to run* out of the box.

Commonly used behind tombstones or similar objects with smaller light weight (up to 25lbs) props.

Includes mounting holes in base for easy mounting.

Size 18" x 12" x 10"
Price $295.00 Sale Price $255.00

 

 

 

 




DC Torso Erector


The DC torso lifter is a professional built erector that was built to accommodate the common "bucky" Skeleton and give life(movement) to a once static prop. The erector bolts safely around the spine of the skeleton, and erects a bucky from a laying to sitting up position (approximately 90 degrees).

Perfect for use in coffins or mounted to the ground. Lifter must be bolted or staked into onto a solid surface to ensure the armature and prop remain in its desired location. Welded mounting tabs included.

Due to the fragile nature of the "Bucky" skeletons, DC advises that the skeleton (specifically the arms) be corpsed using latex and cheese cloth to adhere the body together. Corpsing will greatly improve the strength and life span of the skeleton. Works best with arms in static position, such as attached to chest and will prevent flailing arms and possible injury.

Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Also includes a "stopper" brace to prevent un-desired strain on the cylinder.

Bucky torso not included, but available.

Approximate Size 20" x 10" x 6"
Price $345.00 Sale Price $325

 

 

 


DC Vertical Mover
(New 2010 Low Profile Design)

The DC Vertical Mover was designed for use in areas that only straight up and down movement can be applied (ie. no 4 bar lifter mechanisms).

The DC vertical mover is a vertical slide platform that provides 17" of vertical movement, while removing all side to side movement and stress that is placed on a cylinder rod during movement. The mechanism houses a 17" cylinder between two solid steel guides that provide an extremely smooth movement with a very strong and stable mounting surface(the travel on this mechanism can be customized up to 48" per clients request for an additional charge).

Commonly used inside wine barrels, or to lift partial coffins vertically.

Built using 14 Gauge tubular steel and professional pneumatics. Kit includes everything needed to operate and control and ships ready to run* out of the box.

Size 32" x 8" x 12"
Price $440.00 Sale Price $399



DC Horizontal Mover


The DC Horizontal Mover extends most light/mid weight props (up to 25lbs) horizontally 12" at a slight angle to provide movement to ground moving props such as spiders, ankle grabbing corpses, or similar props. Originally designed to be used in holes or other low light areas where the prop comes towards your viewers*.

Built using 14 Gauge tubular steel and professional pneumatics (12 V valve with 110V standard power supply included). Kit includes everything needed to operate and control and ships ready to run out of the box.

This extender can be modified to extend up to 24" for an additional charge

Size 26" x 12" x 10" Price $360.00 Sale Price $340
* Never use this mover in close proximity to viewers.






DC Torso Erector
w/ Arm Extension

The DC torso erector with arm extensions is the same mechanism as the Torso Erector, but with an additional armature added to lift the arms from a resting position on the sides of the rib cage, to an outstretched reach in upwards (triggered) position.

Due to the fragile nature of the "Bucky" skeletons, DC advises that the skeleton (specifically the arms) be corpsed using latex and cheese cloth to adhere to the arm bars. Corpsing will greatly improve the strength and life span of the skeleton.

Arms are adjustable at the elbows.

Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Also includes a "stopper" brace to prevent un-desired strain on the cylinder.

Approximate Size 20" x 16" x 8"
Price $399.00 Sale Price $370


DC Barrel Lifter


The Barrel lifter is a modified lifter similar to our trash can and wall mount lifters, but designed for use in a standard 55 gallon steel drum. The lifter utilizes the barrels strength as its main mounting surface and utilizes this support to minimize room within the barrel, in turn allowing larger props to fit within the tight space. Best of all it can be used (and was designed specifically for) use under water.

The lifter includes two welded mounting brackets that connect into the barrels wall and approximately 40' of tubing to route the valve far away from the barrel. This setup includes a 24V valve setup with 110V transformer, to minimize any risk of shock if used in conjunction with water. However the wall mount transformer must be placed away from and mounted securely to a wall, away from areas that may come in contact with water.

Lifter provides 24" of vertical movement measured from the top of the mounting platform (designed to completely submerge a full bucky torso).

Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box.

Size 24" x 16" x 6"
Price $365.00 Sale Price $340


Click here for more pics


DC Electric Chair Victim with Custom Wheel Chair


"Twitch" as we like to call him is a brand new Electric Chair armature housed within a Ghost Ride body form. It also features a latex host ride head and "curl" hands. He was originally going to go in our haunt, but due to the violent movement and different theme, we never ended up using him. The chair was used for our cripple prop. We have a prisoner outfit and straight jacket that will be included.

The Wheel chair is custom hand built based off an antique wheelchair. It is a solid steel frame with hard wood inlays. Approx 40hrs of fabrication went into the chair.

Includes pre-programmed Hauntbots controller with infrared sensor and all pneumatics.

Requires Freight Shipping - pickup recommended

Price $3200.00


Spider Victim

The Spider Victim is a custom erratic moving character that is suspended from the ceiling via a large cocoon of faux spider webs. Movements include moving head tilt, kicking legs, leaning torso and 2 movement outreaching arm. Custom audio track also included.

The prop is build around a custom DC erratic hangman kicker, Ghost Ride Body form, Ghost ride hands, and Midnight Ghoul head. It is coated in multiple layers of latex and cheesecloth and finished in a coat of latex coated webs (approx 3 gallons of heavy mold builders latex were used in webbing this guy in @ $75 a gallon). We recommend spraying the character and surroundings with additional webs to make it more realistic. Materials alone w/o any labor ran $3800.

All SMC 24V 2100 series valves, wiring, & tubing are included. No controller is included, but one can be added for an additional charge.

Requires controller, air, power, and 24V power supply for valves. Audio player recommended

Size: 7' tall, 3' deep, 4' wide. Approx 300lbs Requires freight shipping.

Price $4200 (ships freight approx 48" x 48" x 86" @ 250lbs)





"RIP" Tombstone


The DC RIP Tombstone is an oversized tombstone that houses a half toe pincher coffin that rises up from behind the tomb 24"; exposing your prop (corpse not included) surrounded in a plush red satin lined coffin. Plywood and 2x4 framed coffin with steel and polyethylene guided lift mechanism. The tombstone is painted in multiple coats of granite paint, and sealed with UV resistant clear coat.

The RIP is illuminated from above with green rope light. It has been used in our haunt for 5years but is in great condition. Coffin folds into tombstone for compact storage.

This prop can be manually controlled via a hand held trigger or wireless hand held trigger - or automated with a simple controller (add $120).

Requires 100psi air supply, 110V power and a controller is recommended.

Price $1100.00 w/o corpse (approx size is 48" wide, 30" tall, & 36" deep with coffin at an angle) Requires freight shipping or local pickup)



Two Way Mirror Corpse


Used in our indoor morgue for 2 seasons (approx 12 days) this Large 2 way mirror with antique picture frame appears to be a standard mirror until controller detects movement, then main light (in your room) turns off, and light behind mirror turns on, exposing the red eyed evil skele. Price includes Prop1 controller with two 110V relays (one normally on, and the other normally off), power supply, controller case, all wiring and Infrared Sensor. Corpsed and antiqued bucky torso (included) mounts to wall behind mirror.

VERY Minor scuffs/scratches on mirror. Acrylic Mirror (w/o frame) cost $450 alone!

Price $800


Tombstone Popper


Used in our outdoor cemetery scene last year, this tombstone popper is a simple vertical lifter ($440) that has a ExMortis tombstone ($85), Ghostride "haunted man" head ($99 ), pre-programed prop 1 controller, audio player, speaker, and PIR.

When triggered, the audio player plays a cool disney-esque scream and the head pops up from behind the tombstone. It also has LED lighting to illuminate the tombstone and head.

Disney HM Lovers - This is a very Disney-esque prop - hence the reason I built it :)

Nearly new, may have a few cob webs and dust - otherwise its almost new (maybe activated 20X over 2 days)

Price $900



Nanny & Peek-A-Boo

The Nanny and Peek-A-Boo is a MORBID yet very cool 4 movement prop that features a full skeletal character (corpsed and antiqued) with our animated skull that holds a crying baby. The skeleton is supported on a heavyweight steel platform to keep her standing throughout movement.

When activated the baby begins to cry, then a few seconds later the nanny skull lifts and looks away from the corpsed baby towards your viewers, opens it mouth and screams, followed by the corpsed baby popping up while screaming and spraying a mist of water out of its nose.

Price includes character's, preprogrammed controller, amplified audio player, water reservoir, and all power and pneumatics. 100% self contained and plug and play.

Price $2300 (requires freight shipping) Approx size - 5' tall, 30" wide, 12" deep, and weights about 120lbs)



Click Here for more pictures
Video coming soon!


Attacking Spider (HUGE)

Technically this is brand new as the spider was used as a static prop for only 2 days, but the mechanism is brand new (the valve bank is very lightly used), and controller is 100% brand new.
The Attacking Spider is driven by a 3 movement "arm" enabling the spider to move independently in 3 ways: lifts off the ground, tilts to attack, then lunges forward at your viewers before spraying water at desired intervals.

The spider is a Distortions Unlimited oversized Black Widow ($120 + $50 inship) and was modified by inserting 5/16" steel rods into each leg and a steel subframe in the body. The leg armatures are heavy duty, but when the prop moves, the legs and body bounce with a cool lifelike motion. The spider is HUGE - nearly 5 feet wide (leg tip to tip) and the body is approximately 24" long.

Includes custom pre-programmed controller (with PIR-infrared sensor), 110V relay for switched lighting (turns on a 110V light or strobe during attack movements) movement platform, all wiring & pneumatics (SMC 24V DC valve bank - est value $400), DC High Volume Spitter Mechanism, and spider.

This prop is being sold BELOW COST of materials alone - no design time or fabrication has been added.

Price $1700 (requires freight shipping)


Skull Chandelier

This skull chandelier is a very cool heavy duty prop that will look great in any haunt. It is built out of resin and fiber reinforcements and weights approx 50lbs.

It has been modified with an SD flicker Circuit and real wax candles, so it appears to have burning candles.

One of the "arms" was damaged, but was fixed (re fiberglassed and reinforced internally) and is not noticeable.

Price $550 (requires additional packaging, and UPS oversized shipping)

 



DC Spitter Mechanism


The DC Spitter mechanism is the mechanical device that allows for a animatronic to spray water at viewers when triggered.

Simply run mechanism upwards through the props body, place nozzle into the mouth, and submerge the feeder tube (purple) into water (1-5 gallon recommended, but works great in a barrel prop where the reservoir is part of the prop).

When triggered, water will siphon from reservoir, and a fine mist of water will shoot between 6-12' out of the mechanism tip.

Kit includes 12V valve, back flow prevention valve, 10' tubing, and feeder system.
(Skull not included)

Price $120.00 Sale Price $100


DC Ankle Tickler


The DC ankle tickler features six 12" silicon whips that erratically whip around your viewers feet.

Controlled via hand held trigger or with an animation controller (controller is user programmable, extremely easy!).

To operate, simply secure mechanism behind or on wall (you will need to drill 6 3/8" holes thru wall if mechanism is located behind wall), apply pressure to main air inlet (runs off 60-120 PSI) and plug in power supply.

To actuate the manual ankle tickler, simply push hand held trigger button and whips will begin to whip around erratically.

Kit includes 24V valve, 6' supply hose, six 14" whips, hand held controller with 12' of wire and air supply hose w/ 1/4" NPT male fitting.

Price $220.00 Sale Price $205





 



Spitting Spider Pop-up


The spitting spider is a custom light lifter that launches a 24" latex spider 24" up and slightly towards its viewers. In addition, it sprays a
a mist of water up to 6' (at 120PSI).

The spiders unique design allows for the spider to start at a low resting height, but rises throughout its travel with the mouth of the spider pointing slightly upwards to spray your viewers at chest level.

Price includes all mechanics, posable 18" latex spider, spitting mechanism, and hand held push button controller (or choose automated version with infrared controller.

Price $475
Sale Price $450.00

Automated version: Price $590 Sale Price $560.00




Spitting Rat Pop-up


The spitting rat is a custom light lifter that launches a 18" tall latex rat up 24"and slightly towards its viewers. In addition, it sprays a mist of water up to 6' (at 120PSI).

The rats unique design allows for low resting height, but rises throughout its travel with the mouth pointing slightly upwards to spray your viewers at chest level. Rat is adhered to the lifter via a steel sub frame and filled with urethane foam for years of use.

Price includes all mechanics, 18" latex rat, spitting mechanism, and hand held push button controller (or choose automated version with infrared controller.

Price $480.00 Sale Price $430.00

Automated version: Price $590 Sale Price $540.00



DC Mini Air Cannon


Similar to other manufacturers cannons, but at a fraction of the price, the DC mini air cannon delivers a large blast of air that is guaranteed to startle without blowing out your viewers eardrums.

To use this mechanism, simply mount the bracket to a stable wall, apply power to the valve, attach an air source (ie your air compressor line, not included), allow the tank to fill (60-80PSI recommended), push the trigger button and BANG!!!!!!!!
Out fires half a gallon of compressed air in less then a half second.

The DC Cannon also has the option of being fully automated with an AM1 realtime controller which includes an infrared sensor and easy to program sequence. For this automated version, choose "Automated Air Cannon" button below. Automated version replaces the hand held trigger with a sensor, but a hand held trigger is available upon request for an additional charge.

Automation should only be used when small children ARE NOT going to be present.

No mandatory re-fill is required between firing with this version.
ONLY FIRE CANNON TOWARDS VIEWERS FEET.


Constructed using only professional parts, the cannon includes a 1/2 gallon air tank with clip on mounting brackets, High flow dump valve, hand held trigger and 12v electrical connections.

Price $220.00 Sale Price $200.00

Automated version (includes controller w/ PIR) $335.00
Sale Price $300.00


Rocking Shovel


A simple animation for graveyard eye candy. The shovels rock back and forth slowly with all motors and mechanics hidden behind a tombstone or within a fiberglass rock(tombstone or rock not included - add $65.00). Requires 110V power.

Price $280.00 Sale Price $265


DC Design Studio T-Shirt

4 color processed - Silk Screened t-shirt with "DC Design Studio" centered on chest and "DC Design Studio" Logo on back. Printed on High Quality Hanes "heavyweight" brand shirts.

Specify T-Shirt color when ordering: Gray, Brown, Blue, & Black (electric green logo - out of stock).

Sizes: LRG, XL, (please specify when ordering)

Price $15.00 Sale Price $12.00
DC Design Studio KIDS T-Shirt

4 Color Processes - Silk Screened Kids T-shirt with "DC Design Studio" Logo centered on chest - nothing on back.

Printed on High Quality Hanes "Tag less" brand t-shirts.

Black & Blue Shirts Only
Sizes: XSM - please specify color when ordering

Price $12.00 Sale Price $8.00

DC Design Studio Sweatshirt

Screen printed with "DC Design Studio" text on center front chest and large DC Design Studio / DC Props Logo on back

Available in Lrg & XL sizes

Avail. Sizes: LRG, XL (please specify when ordering)

Price: $30.00 Sale Price $20.00

DC Design Studio Screen Printed Work Shirt

4 color process screen printed Dickies work shirt with "DC Design Studio" centered over chest pocket and large DC Design Studio/DC Props Logo on back.

Available in Black Only.

Sizes: LRG, XL, (please specify when ordering)

Price $26.00 Sale Price $18.00

DC Design Studio Embroidered Work Shirt

2 color stitching - Dickies work shirt with "DC Design Studio" centered over chest pocket

Specify Shirt color when ordering: Tan or Black.

Sizes: LRG, XL, (please specify when ordering)

Price $22.00 Sale Price $16.00

OEM Thunder & Lightning Controller

This unit is a one channel light organ KIT that when assembled will control one 120V light bulb to simulate lightning. Requires electronics/soldering knowledge and stereo amplifier. Requires positive and negative speaker line input from sound source.

Detailed instructions included.

Price $35.00 (unassembled) Sale Price $25.00

Price $55.00 Sale Price $40.00 (assembled, case and socket wiring not included)



25W Spiral High Output Black light Bulb


These small screw in black light bulbs put out the same amount of UV light as a 24" fluorescent, but in a small form factor.
Specs:
Volts: 120
Watts: 25
Avg. Life Hours: 10,000
Shape: Spiral
Base Type: E26 Medium Screw
Base Material: Nickel Plated Brass
Finish: Black Light Blue
MOL: 6.00 in. (152.40 mm.)
Diameter: 2.30 in. (58.42 mm.)

Price $14.00 Sale Price $10.00
 

LED Spot Light

Specifications:

Now Available in 5 Colors - White, Blue, Green, Red, Orange * Ready to plug in to any standard 110v AC lamp socket. Please Specify Color when ordering.

Price $8.50 Sale Price $5.50



LED Strip Light


Specifications:

Great for low voltage lighting and for concealing lights in tight spaces. Easily integrated into our 12V props, so with some simple wiring add light to your prop without the need of extra 110V wire and sockets.

High brightness LED strip come in either a 8 OR 24 LED configuration. They are fully waterproof, and have been tested for performance and durability in extreme heat, vibration, and are completely shatterproof. All LED Cluster are packed in sealed anti-static bag.

Brown: '+', positive; Black: '-', negative. We recommend connecting these to a regulated 12V DC power supply (500ma) which will run 10 strips per power supply.

Never Connect to DC Voltage Over 13.8V!

8 LED Strip - Price $6.50 Sale Price $4.50

24 LED Strip - Price $8.50 Sale Price $7.00

 

   
Home | About DC | Stock Props | Custom Designs | Accessories | Sale Items | Books & Videos | Contact | Legal Disclaimer

Copyright 1994-2010. DC Design Studio, LLC. All rights reserved.
Site designed, owned and maintained by DC Design Studio, LLC.

Hit Counter
Visitors Since January, 2005