Disclaimer

By purchasing or using any information from this site, the client assumes full responsibility
and liability for the products use.

DC Design Studio is not responsible nor liable for any damage or injury caused by our designs and or mechanisms.
This includes but is not limited to: injury, bodily harm, property damage, and or death.

The mechanisms were designed with safety in mind, but misuse, improper setup (including proper mounting), and or
modifications made to these mechanisms is not the responsibility of DC Design Studio.

We urge you to follow the directions of each of our mechanisms and never make any modifications without
advise from our designers. Always treat the mechanisms as potential hazards, and never use nor display where
direct contact may occur.

Lastly the props (non-dc) on this website and in our book(s) have not been tested for any safety standards or regulations.
Although the props are built with safety in mind, the end user of these mechanisms should use extreme caution
when building as well as displaying most of the props in this site. Issues arising from use of these products, but be directed
to the manufacturer, not DC Design Studio. We will be glad to help in any way by providing you with necessary contact
information.

Safety tips

1. When setting up pneumatic props, never add air until the prop is mounted securely. When adding air, first
check that all tubing and fittings are mounted securely, then stand away from the prop and carefully connect
the valve to the air supply.

2. When working with pneumatics, always start with your air pressure low and your flow controls open to a
minimum then work up the pressure until you achieve the effect you are looking for. Also always disconnect
the air when working on or with one of these props. You never know when the solenoid may fire and it's not
going to stop for your face or body parts.

3. All DC Props are designed to opperate between 30-120 PSI. Failure to stay within these parameters will void
all product warranties, and is extremely dangerious.

4. To ensure a long life of pneumatic products, proper water traps/ filters/ lubricators and pneumatic oil should be used.

If you use common sense and protect yourself from harmful tools and chemicals, there should be no reason
that you can't have year after year of haunting enjoyment with all of your fingers.

BE SAFE