Control

The Following is a simple guide to help you choose which controller is best suited for your application and the level of programming you feel comfortable using. For additional information to help you choose the controller thats right for you, click here.

Easy:
Entry level for user with little or no experience with controllers and or electrical knowledge. These controllers require simple triggering/automation.

Moderate:
A moderate controller requires minimal electronic knowledge and require no computer based programming. These controllers are used when multiple triggering is needed, IE turn on a light, trigger a fogger, and fire a pneumatic prop.

Advanced:
An advanced controller is generally a complex multi output or bare bone OEM controller (exposed circuitry and no protective case) that must be first hard wired then configured with a computer based programmer. If multiple voltages are to be triggered, mid-level electronic knowledge and other accessories may be rrequired. DC Specializes in building these custom controllers to customer specs. Please contact us at info@dcprops.com for a quote on a custom controller.

Number of
outputs

Easy

Moderate

Advanced

1	Manual Push Button Trigger	Switchmat	HM Animation Maestro 1
2	PicaBoo (all versions)	SD Keybanger Lite	HM Animation Maestro 2	CD Pet III & Vari-Pet
1-6	Gilderfluke Mini-Brick 4 (1-4)	SD Keybanger (1-6)	Boo Box Mini (1-4)	I/O Geek (integrates with PC)
1-8				Gilderfluke Minibrick8	Gilderfluke Minibrick8 (realtime)
1-16+					SD Midi Interface Gilderfluke 40/50

Simple Controllers - Moderate Controllers - Advanced Controllers - Audio Products - Pneumatics - Misc Accessories

Simple Controllers

	Hand Held push button trigger Hand held trigger for use with low voltage props or starting one of the controllers below. If purchased with a DC Mechanism, upon request, we will install at no additional charge. Price $35.00
	Wireless 110V controller Perfect for control over any 110V element. Control plug-in devices up to 100' away, even thru walls. No wiring required, easy installation. Receiver plugs into any 3-prong grounded standard outlet. Max. Resistive Loading: 960W. Max. Incandescent Loading: 300W. The possibilities for the wireless power switch are endless. Price $35.00
	Animation Maestro 1 We highly recommend this controller for single movement prop animation, and for our spitters and air cannons. Extremely simple to hookup and use. Repeat Control Timer, Event Control Timer, Flip-Flop Control, Fogger Control, Puppet a Prop, Light Control… THIS ONE DOES IT ALL!!! Easy to program just record like you are acting the part yourself ! Powered by 12vdc power supply (included) can be triggered or run continuous! Follows what you record for up to 2 Minutes of programming time! Has NO* and NC** contacts so can turn off light when prop activates! Delay before, Delay after with perfect precision just wait how long you want! Flip-Flop lights for a mirror changing illusions! Give some real action to that "ONE POP WONDER" pneumatic prop! Use as fogger control to get long and short blasts on a 2 min repeat cycle! Relay rated at 110 vac. so with proper wiring can control any AC prop! Price with Infrared Sensor $110.00 * Normally Open **Normally Closed
	Animation Maestro 2 We highly recommend this controller for 2 movement prop animation. Extremely simple to hookup and use! Repeat Control Timer, Event Control Timer, Flip-Flop Control, Fogger Control, Puppet a Prop, Light Control… THIS ONE DOES IT ALL!!! Easy to program just record like you are acting the part yourself ! Powered by 12vdc power supply (included) can be triggered or run continuous! Follows what you record for up to 2 Minutes of programming time! Has NO* and NC** contacts so can turn off light when prop activates! Delay before, Delay after with perfect precision just wait how long you want! Flip-Flop lights for a mirror changing illusions! Give some real action to that "ONE POP WONDER" pneumatic prop! Use as fogger control to get long and short blasts on a 2 min repeat cycle! Relay rated at 110 vac. so with proper wiring can control any AC prop! Price with Infrared Sensor $155.00 * Normally Open **Normally Closed
	Keybanger Lite The keybanger Lite is the exact same controller as the Animation Maestro 2. Able to switch 2 outputs and programmable in real time. Key Banger lite includes: Controller, 12v wall adapter, and PIR sensor Price $150.00
	Minibrick 4 The Gilderfluke Minibrick 4 is a 5-32V DC prop controller that will control up to 4 individual outputs and can be programmed in real-time. This controller can also be controlled using the gilderfluke control software for precision prop control (additional programming cable required) Price $110.00 MB4 Programming Cable $85.00

Moderate Controllers

	PicoBoo -103 When only a couple channels are needed, the picoBoo FI-103 is the most cost-effective, yet power solution available. This basic model provides two 10 amp relay outputs. Programming is done in real time via integrated push button swithes. One input is provided for your choice of trigger device. Price $72.00
	PicoBoo with Sound - 104 The FI-104 has all the features of the FI-103 plus it adds two (2) minutes of onboard solid state audio. Sound quality is similar to an AM radio. It also has both ambient and scare modes. In the ambient mode, only sound is produced. Once triggered into the scare mode, a different sound track may be played and your scare routine is activated. An audio amplifier and speaker are required. Price $Coming Soon
	PicoBoo with Sound & AC Outputs - 105 2 AC Outputs • 2 Minutes Digital Sound • 2 Minutes Animation Replace the relay controlled terminal strips with AC outlets on the FI-104 and you have the model FI-105. Price $109.00
	Boo Box Mini 2 AC Outputs • 4 Terminal Block Outputs • Digital Audio Repeater Amplifier • 5 Operating Modes The BooBox Mini provides four 10 amp relay outputs (normally open or normally closed), plus outputs 1 and 2 are connected to AC outlets. Lights, strobes and motors simply plug in. Audio is accomplished with a flash memory chip that records up to 4 minutes of sound. No computer or special software is needed. A built-in 22 watt audio amplifier drives virtually any speaker. A trigger input can be connected to a variety of trigger devices such as motion sensors, optical sensors, pressure mats, remote (radio) triggers and more. Pre and post trigger delays insure that the scare goes of exactly when planned. The BooBox Mini has two basic modes… ambient and scare. While not triggered into the scare mode, the BooBox Mini is in the ambient mode by default. In this mode only audio is playing. Once triggered, the BooBox Mini enters the scare mode and runs your pre-programmed scare routine. Real time programming is accomplished with the included BooBox Mini programming kit. • Voltage: 120 VAC • Current (w/ AC outputs): 10A max • Animation: 4 minutes at 30 FPS • Audio: 4 minutes total (ambient + scare) • Normally open or closed trigger • Connector also supplies 12 volts to sensor if required • 4 normally-open or closed contact closures (10 amps each) • 2 AC Outputs (8 amps max b/w both) • Amplifier: 22 watts into 4 ohm speaker • Line level output for connection to external amplifier Price $ Coming Soon
	Boo Box Scene controller • MP3/WAV player • Light Effects • Stereo Amplifier Price $ Coming Soon
	Key Banger (OEM) The SD Key Banger is the easiest and most user friendly multi-output controller on the market. This multi output (six channel) prop controller allows recording custom sequences by pressing on single or multiple function keys at desired intervals (0-6 buttons can be pressed at one time) with a 4+ minute record time. Your sequence will be played back whenever the green "GO" button is pressed or the optional passive infrared motion sensor detects movement. However, if you prefer continuous playback, removal of the provided jumper will continually loop your sequence. SD Key Banger includes: Controller, 24v wall adapter(outputs are rated at 24 volts DC Max at 3/4 Amp) PIR Sensor not included (see accessories page) Programming Instructions (link) Price $100.00
	I/O Geek The IOGeek is designed for controlling animatronic pneumatic props with sound using your PC. The entire package consists the IO board (with relays, and switch inputs), and Graphical User Interface control software. There is plenty of on-line help in the program to guide you along as you make your screen display. Music: The IOGeek software allows you to play up to 5 sounds through your PC stereo speakers - independently controlled and simultaneously. In addition the sounds can be controlled from the GUI program. Price $180.00

Advanced Controllers

	Minibrick 8 The Gilderfluke Minibrick 8 is a 5-32V DC prop controller that will control up to 8 individual outputs, 2 inputs, and can be programmed in real-time or via the gilderfluke control software for precision prop control (serial cable required). Price $220.00
	Boo Box Mini (OEM- No Case) The BooBox Mini provides four 10 amp relay outputs (normally open or normally closed). Audio is accomplished with a flash memory chip that records up to 4 minutes of sound. No computer or special software is needed. A built-in 22 watt audio amplifier drives virtually any speaker. A trigger input can be connected to a variety of trigger devices such as motion sensors, optical sensors, pressure mats, remote (radio) triggers and more. Pre and post trigger delays insure that the scare goes of exactly when planned. The BooBox Mini has two basic modes… ambient and scare. While not triggered into the scare mode, the BooBox Mini is in the ambient mode by default. In this mode only audio is playing. Once triggered, the BooBox Mini enters the scare mode and runs your pre-programmed scare routine. Real time programming is accomplished with the included BooBox Mini programming kit. • Voltage: 120 VAC • Current (w/ AC outputs): 10A max • Animation: 4 minutes at 30 FPS • Audio: 4 minutes total (ambient + scare) • Normally open or closed trigger • Connector also supplies 12 volts to sensor if required • 4 normally-open or closed contact closures (10 amps each) • Amplifier: 22 watts into 4 ohm speaker • Line level output for connection to external amplifier Price $ Coming Soon
	SD Midi Interface The Delusional Prop Interface is used control valves and other devices operating on 7 to 35 volts dc, via midi commands. Provides a complete interface between any MIDI standard controller and any device capable of being controlled electrically Provides a complete interface between any MIDI standard controller and any device capable of being controlled electrically Supplied as a single high quality glass fibre (FR4) pcb measuring 4" x 2.5" Three #6 mounting holes provided on the circuit board 16 outputs (open collector 'pull-down'), each capable of sinking 500 mA at up to 35 Volts, inductive or resistive load Screw terminal connections provided for power supply and outputs 5-pin DIN socket for MIDI input and thru Unit can respond to MIDI channels 1 to 4, selectable by on-board jumpers Many units can be chained together to build up a large system Responds to note on/off Supports MIDI running status Unit is powered by supply for output devices anywhere in the range 7 to 35 Volts DC Notes selectable in blocks of 16 with on-board jumpers Price $85.00
	Sd-50/8 Stereo Audio Playback, Show Control, Lighting Control and Amplifier System The Sd-50/8 is a complete stand alone stereo audio playback system with 8 Show Control Outputs. The show control and DMX-512 output options make it into a complete Audio and Show Control solution. Price $885.00
	Sd-50/40 Stereo Audio Playback, Show Control, Lighting Control and Amplifier System The Sd-50/40 is a complete stand alone stereo audio playback system with 40 Show Control Outputs. The show control and DMX-512 output options make it into a complete Audio and Show Control solution. Price $1005.00

Audio Products

	Animation Maestro Audio Player This is a very basic sound player that has an onboard microphone that allows you to record 30 seconds of audio onto the onboard chip for playback whenever a play command is sent from the controller. Using this product along with an animation maestro 1 or 2 is extremely easy, as they have an input socket the player plugs into, and an output plug that you'd plug a pair of amplified computer speakers into. The animation maestros send a "play" signal to the player when the output is activated, so your audio and prop start at the same time. Price $55.00
	SD-10 Audio Player (MP3 Quality, Non-Amplified) The Sd-10 is a complete stereo audio repeater. It can be used in Store-Casting, Music-On-Hold, Museum, Haunted Attraction, Safety, Industrial or Entertainment applications. Anywhere you need a solid state, high quality audio system that will play for years. The Sd-10 can be dropped right into an audio system in place of a CD player. Price $185.00
	Animation Maestro MP3 Player Similar to the above audio player, but mp3 quality sound output. To use this controller, you simply download the sound you wish to use into a SD card (not included), then insert the card into the MP3 player. A signal is sent to the player from the controller to start the audio. No need to waste an extra output to start your sound. Price $150.00
	SD-25 Audio Player (MP3 Quality, Amplified) Stereo Audio Playback System with Amplifier The Sd-25 is a complete stereo audio playback system. It can be used in Store-Casting, Music-On-Hold, Museum, Safety, Haunt, Industrial or Entertainment applications. Anywhere you need a solid state, high quality audio system that will play for years. Price $305.00
	AMP-50 Audio Player (MP3 Quality, Amplified) The Amp-50 is a Class-D stereo audio amplifier. It can be used in Store-Casting, conference rooms, home theaters, car audio, museum, safety, haunt, industrial or entertainment applications. Anywhere you need a solid state, high quality audio amplifier that puts out an amazing amount of power, but barely gets warm. Price $182.00
	SD-50 Audio Player (MP3 Quality, Amplified) Stereo Audio Playback with 50 watt amplifier System The Sd-50 is a complete stand alone stereo audio playback system. The show control and DMX-512 output options make it into a complete Audio and Show Control solution. Price $585.00

Pneumatic Parts & Accessories

	Standard 4 way valve 4 way, 2 position pneumatic solenoid valve. 1/8" npt ports. 21-115 psi working pressure. Cv is 0.67. Aluminum body with NBR seals. DIN type electrical connector with manual override and LED (no need for a manifold if only using one valve). 24V DC. Price $35.00
	Standard 4 way valve 4 way, 2 position pneumatic solenoid valve. 1/8" npt ports. 21-115 psi working pressure. Cv is 0.67. Aluminum body with NBR seals. DIN type electrical connector with manual override and LED (no need for a manifold if only using one valve). 110V DC. Price $35.00
	Manifold for standard 4 way valve Standard base mount manifold for above valves. Includes all mounting hardware and gaskets and has 1/4"NPT inlet and exhaust ports for supply air. Avail in 4 or 6 position. Connection uses the body ports on the face of the valve to conect to cylinders, and a main inlet for connection af all valves to your air source. Simply attach valves to manifol, and screw in all fittings. Airline fittings not included, but avail below (you'll need 1 bag of each 1/8" NPT and 1/4" NPT, specify thread and tubing size when ordering). Price $35.00 4 position Price $40.00 6 position
	Poly-Vinyl Airline Available in 1/8", 5/32", and 1/4"OD Diameters. Please specify size and length. (specific colors are also be available) Price per 10' foot increment $4.00 (10' increments only)
	Push in fittings Pneumatics push in fittings for use with poly-vinyl or polyethylene tubing. Please specify port size and tubing size. (ie. 1/8" NPT x 1/4" tubing). Sticking with 1/4" tubing is almost always a safe standard. (ie 1/4" tubing, 1/4" flow controls, and 1/4" port fittings. 1/8" NPT (thread) is very common (generally standard) thread size with most cylinders. 1/4" NPT (thread) is very common (generally standard) thread size with most valve ports and for connection to a female threaded air compressor nipple (quick disconnect) fitting. Email us if you have any questions. Price $18.00 (10 pieces)
	1/8" In-Line Flow Control Pneumatic in-line flow control for use with 1/8" polyvinyl or polyethylene tubing. Price $16.00
	5/32" In-Line Flow Control Pneumatic in-line flow control for use with 5/32" polyvinyl or polyethylene tubing. Price $16.00
	1/4" In-Line Flow Control Pneumatic in-line flow control for use with 1/4" polyvinyl or polyethylene tubing. Price $18.00
	Complete Valve Setups Complete valve setups includes 24V or 110V valve, wiring or power supply, all necessary push in fittings, 20' of tubing, two flow controls, and 1 cylinder (cylinder included is a numatics 10" stroke 1" bore cylinder). Comes Standard with 1/4" setup, but larger, smaller, or mixed tubing also available. (email DC for price difference if any). Comes just about ready to run, just connect fittings to cylinder and connect air compressor fitting to feed line. 110V Valve setup (we will not wire in a hand held trigger for 110V use) Price $125.00 24V Valve setup Price $140.00 24V Valve setup with Hand Held trigger Same setup as above but with hand held trigger mounted on 20' trigger cord. Price $175.00
	Complete Valve Setup for Barrel Spitter or pneumatic spitter pop up. Complete valve setups includes 1 24V valve, 24V power supply, all necessary push in fittings (including bulk head fittings for submerging your airlines under water), 40' of tubing, 2 flow controls to regulate both movements, 1 10" stroke 1" bore air double acting air cylinder with rod clevis, and 1 DC Spitter Mechanism. This is the exact setup we use in our barrel lifters! Please note the cylinder and the main hose of the spitter mechanism are the only portions that can be submerged under water! All electrical components must be a minimum of 4' away. Barrel Lifter Valve setup w/o controller. Price $265.00 Same as above but with wired hand held trigger (both the spitter and valve will be tied into 1 trigger, ie it will begin to spit as it lifts) Price $300.00 Add our dual output animation maestro controller to automate the lift and spit sequences individually (ie lift prop, wait 2 seconds, spit for 5 seconds, descend prop, lift again, spit again, stop spitting, descend then wait 20 seconds between triggering). Price $400.00

Miscellanious Accessories

	9-24V DC PIR Sensor Passive Infrared Motion Detector for use with Minibrick controllers (unwired). The Ir-Passive is a Passive infrared Motion detector for starting shows/sounds when people are detected. Ignores small critters. Up to 40’ x 40’ coverage. Price $55.00
	PIR Sensor Passive Infrared Sensor for use with haunt controllers (includes 12' flexible wire). * PIR's require a controller to accept their pulse signal. Connecting a PIR to anything over 9V will destroy the PIR and will not result in a prop actuation. These PIR's are only for use with haunt controllers that provide connections for PIR's. Price $36.00 Un corded PIR Price $18.00
	Switch Mat CVP Mats use field-proven ribbon switch technology, which eliminates the need for plates or screen mesh switching elements. They operate as normally open switches and can be used to control relays, lights or alarms from a low voltage source. CVP Mats can function as hidden switches when placed under carpeting or matting. All units are tested at 1 ampere, 115 volts ac. For floor switching, however, 24 volts or lower is strongly recommended. Specifications Actuation Force: 5lbs normal Recommended Voltage & Current: 24 Vac or Vdc at 1.0 amps max. Available Sizes : 6" x 23" (3/32" thick) Color: Olive green (for special colors, contact Tapeswitch) Switching: Normally-open switches that close on contact Price $75.00
	Boo Box Real-Time Programming Console Discover the true power of the BooBox with our Real- Time Programmer (RTP). Now even the most elaborate scenes can be easily programmed by simply pressing buttons and moving sliders in real time. Synchronize the outputs with sound by placing the desired MP3 file on the flash card. When you hit record the sound will begin playing, then simply synchronize the outputs with the sound manually as you hear it. The RTP uses buttons to program the relay outputs and sliders to program the lighting outputs, giving you an infinite range of effects. You can program as many or as little outputs at a time as you want, keep programming over an output until it's just right. Since the RTP plugs directly into the BooBox, no computer is needed. This makes it simple to tweak or completely change programs quickly and easily. Price $ Coming Soon
	Boo Box PIR Sensor The passive infrared (PIR) motion sensor we've chosen is a high quality product designed for use in commercial alarm systems. The sensor mounts easily in the corner of a room or hallway. Depending on the size and speed of the group entering the coverage area, the PIR sensor's triggering time will vary by a second or so. This is a non-issue for the most part and only affects scares that require absolute critical timing. Because the sensor works by detecting body heat, it is unaffected by smoke and fog machines that can confuse beam sensors. Price $45.00
	Gilderfluke Realtime Unlock Dongle With MACs-License you can program and review up to 16 eight bit wide channels in RealTime using just the PC’s keyboard and mouse with no additional hardware needed. Price $665.00

Visitors Since January, 2005